Full Project – EFFECT OF TEMPERATURE ON THE YIELD OF SHEA BUTTER IN AN UNBAFFLED VESSEL AT SELECTED KNEADING PERIOD

Click here to Get this Complete Project Chapter 1-5

CHAPTER ONE: INTRODUCTION

1.1 BACKGROUND

Shea butter has been a traditional heritage of Africa from time immemorial. The triglyceride which contains a high amount of vitamin A, E, F and some other valuable nutrients is widely used in cosmetics and pharmaceuticals, as well as for domestic use in cooking. Nigeria (as well as many other West African countries) is blessed with abundance of the shea tree (from which the shea butter is obtained). Due to increasing demand for this product, especially in the cosmetic industries across the globe, there is a need for process optimization where

a high yield of shea butter of good grade can be obtained with little energy input.

There are basically three methods of obtaining shea butter from shea nut:

·                     Solvent Extraction Method

·                     Use of Mechanical Expeller

·                     Traditional Method

Solvent extraction makes use chemical solvent such as hexane to absorb the oil from the nut. The oil and the solvent are then separated in another column.

In the mechanical expeller process, an expeller is force driven into the nut contained in a tight container. As the expeller presses against the nut in a screw manner, the oil are forced out and collected at the end.

The traditional method (in southwest Nigeria for example) typically involves crushing of the nuts (after the outer flesh of the fruit has been removed) with mortar and pestle. The crushed nuts are then roasted in a large pot over an open fire (burning of fire wood). They are then ground and well mixed to form a thick paste. The paste formed is kneaded by hand and leg in a large container and with constant addition of water, the butter oil are separated, melted in another pot and cooled.

Of these three methods, the traditional process gives the best quality shea butter and it is by far the most preferred in the most industry. However, this process requires a lot of rigorous exercises. According to Bonkoungou in 2005 for example, it would take one person 20 to 30 hours to produce 1kg of shea butter. Also the level of personal and professional hygiene observed by the local producers may render the locally made shea butter unfit for use in areas such as pharmaceutical and chocolate industry. For example, in a research by Ademola, Oyesola and Osewa of the Department of Agricultural Extension and Rural Development, Faculty of Agriculture and Forestry, University of Ibadan conducted on 120 local producers of shea butter from different Local Governments Areas in Oyo state Nigeria, 95.8% of them do not actually wash the fruit before use.

Although the mechanical expeller process may be preferred in terms of energy saving, but it yields a denatured shea butter which can never compete in terms of quality with the handmade type.

The solvent extraction process gives the highest yield since it is a large scale industrial operation that may be adopted for commercial production. However, it is too expensive as the cost of equipment and operation may be more than the capacity of an individual. Also, the interaction of the solvent with the oil still makes the shea butter formed be of lower quality than the locally made product.

A good and sustainable process therefore must be one which can give high yield of uncontaminated shea butter, retain the essential vitamin content and at the same time less rigorous but economically feasible. One way of achieving all these is by modeling the traditional method. Model equipment could be fabricated using a stirrer or impeller to substitute the hand; thereby increasing the efficiency, reducing contamination by hand without loss of nutrients. In such modeling, a number of experiments must be carried out to know the optimum condition of operation of the model equipment. Several parameters must be tested for so as to obtain the best result; and according to literature, these include: kneading time and temperature, impeller type, shaft speed, eccentricity, etc.

Figure 1.1: Washed and dried shea nuts

1.2 AIMS AND OBJECTIVES

The aim of this research is to investigate the effect of kneading temperature at selected kneading period on the yield of shea butter produced from shea paste in an unbaffled vessel.

1.3 SCOPE OF WORK

This research measures the effect of three parameters on yield – shaft eccentricity, shaft speed and impeller type. While eccentricity tries to determine the best position of the stirrer relative to the center of the vessel, the shaft speeds helps to determine the optimum speed of the stirrer while the impeller type tells something on the nature or type of impeller to use. Other parameters such as kneading time and temperature are not considered here (a complementary work considering these two is being undertaken by another student).

Also, the research measures the effect of these parameters only from the kneading operation, (since this is the most important operation where the actual separation takes place) so that the crushing, roasting and milling operations are done prior to measurement, making work faster. The vessel being considered for kneading is an unbaffled one. This is to avoid deposition of materials inside the vessel which may affect the yield.

In all, this research narrows down to a system where the response can be measured within a short while given different input, thus the use of shea paste in an unbaffled vessel.

– 3 –

1.4 SIGNIFICANCE OF WORK

The significance of this research is the multiplier effect and the potential to improve on the processing and thus yield of Shea nut as well as help solve the problem of low quality of Shea butter produce in Nigeria. Some of these are highlighted as follows:

(1)               It would help in determining the best position of the stirrer shaft, as well as shaft speed and impeller type in the vessel.

(2)               It would also help in the optimization of the process and therefore better yield.

(3)               The quality of the product will improve and give higher profit.

(4)               This will also mean more job for more youth since the best method of processing has been known and can now be fully explored on a large scale.

(5)               This will ultimately lead to alternative revenue for the nation and less dependence on crude oil.

(6)                 It would lead to increase in GDP for Nigeria and therefore command respect among the comity of nations.

(7)               It would also make the hitherto scarce quality shea butter readily available to all since buyers may not have to travel down to rural communities before obtaining the product.

– 4 –

1.5 METHODOLOGY

This research shall proceed by selectively kneading at three different kneading periods and at four range of temperature. Samples of Shea nuts shall be exposed to the same treatment as it is done in the traditional method of Shea butter production – crushing, roasting and milling. The parameters of interest (kneading temperature and periods) shall then be experimented with a fixed mass of shea paste at each run. The shaft speed shall be maintained at 968 rpm and the conical impeller shall be used throughout the experiments in accordance with literature.

Get the Complete Project

This is a premium project material and the complete research project plus questionnaires and references can be gotten at an affordable rate of N3,000 for Nigerian clients and $8 for International clients.

Click here to Get this Complete Project Chapter 1-5

You can also check other Research Project here:

1. Accounting Research Project
2. Adult Education
3. Agricultural Science
4. Banking & Finance
5. Biblical Theology & CRS
6. Biblical Theology and CRS
7. Biology Education
8. Business Administration
9. Computer Engineering Project
10. Computer Science 2
11. Criminology Research Project
12. Early Childhood Education
13. Economic Education
14. Education Research Project
15. Educational Administration and Planning Research Project
16. English
17. English Education
18. Entrepreneurship
19. Environmental Sciences Research Project
20. Guidance and Counselling Research Project
21. History Education
22. Human Kinetics and Health Education
23. Management
24. Maritime and Transportation
25. Marketing
26. Marketing Research Project 2
27. Mass Communication
28. Mathematics Education
29. Medical Biochemistry Project
30. Organizational Behaviour
31. Other Projects
32. Political Science
33. Psychology
34. Public Administration
35. Public Health Research Project
36. More Research Project
37. Transportation Management
38. Nursing

Education

Need a Project Writer for a Different Topic

• MSC PROJECT WRITING SERVICES
• MBA RESEARCH PROJECT WRITING SERVICES
• Research Project Writing Services in Lagos Nigeria (Professional Writers) -Law, MSc, MBA,PhD, Dissertations, Thesis, Assignment, Speech
• Masters Research Project Writer in Lagos Nigeria
• MBA Research Project Writer in Lagos Nigeria
• LOOKING FOR A WRITING SERVICES FOR AN URGENT ASSIGNMENTS OR PROJECT WORK
• PROFESSIONAL WRITING SERVICES IN LAGOS NIGERIA (TERM PAPER, SPEECH WRITING, ASSIGNMENT, THESES, DISSERTATIONS, RESEARCH PROPOSAL, PROJECT WRITING SERVICES etc)
• BUSINESS ADMINISTRATION RESEARCH PROJECT WRITER IN LAGOS NIGERIA
• CONSULT A RESEARCH PROJECT WRITER IN LAGOS NIGERIA (PH.D, MBA, MSC, M.ED, BSC)
• MANAGEMENT RESEARCH PROJECT WRITER IN LAGOS NIGERIA
• Education Research Project Writer in Lagos Nigeria
• Environmental Sciences Research Project Writer in Lagos Nigeria
• Guidance and Counselling Research Project Writer in Lagos Nigeria
• Human Kinetics and Health Education Project Writer in Lagos Nigeria
• Early Childhood Education Research Project Writer in Lagos Nigeria
• Christian Religious Studies(CRS) Research Project Writer in Lagos Nigeria
• Educational Administration and Planning Research Project Writer in Lagos Nigeria
• Political Science Research Project Writer in Lagos Nigeria
• Accounting Research Project Writer in Lagos Nigeria
• Economics Research Project Writer in Lagos Nigeria
• Management Research Project Writer in Lagos Nigeria
• Marketing Research Project Writer in Lagos Nigeria
• Public Administration Research Project Writer in Lagos Nigeria
• MBA Research Project Analysts
• In Need of MBA Research Project Writer in Nigeria
• MBA Dissertation Research Project Writer
• MBA Project writer
• EDUCATION DEPARTMENT PROJECT WRITING SERVICES
• BACHELOR OF SCIENCE (BSC) DEGREE PROJECT WRITING SERVICES(B.ED,B.A,B.SC)
• MASTER OF BUSINESS ADMINISTRATION (MBA) RESEARCH PROJECT WRITING SERVICES
• MASTER OF SCIENCE (MSC) RESEARCH PROJECT WRITING SERVICES
• POST GRADUATE RESEARCH PROJECT WRITER
• POST GRADUATE DIPLOMA (PGD) RESEARCH PROJECT WRITER
• MASTER RESEARCH PROJECT WRITER
• MASTER DEGREE RESEARCH PROJECT WRITING SERVICES
• POSTGRADUATE RESEARCH PROJECT WRITING SERVICES
• MASTERS RESEARCH PROJECT WRITING SERVICES
• RESEARCH PROJECT WRITER
• EXPERT IN RESEARCH PROJECT/THESIS/DISSERTATION WRITING SERVICES IN LAGOS NIGERIA
• HIRE A PROFESSIONAL BSC/HND RESEARCH PROJECT WRITER
• HIRE A PROFESSIONAL MBA/MSC RESEARCH PROJECT WRITER
• HIRE A PROFESSIONAL THESIS WRITER IN LAGOS NIGERIA
• SC/M.SC/MBA/PGD RESEARCH PROJECT WRITER IN LAGOS NIGERIA
• Master Degree Research Project Specialist/Writer in Lagos, Nigeria
• Hire A Research Project Writer in Lagos Nigeria
• Research Project Specialist in Lagos, Nigeria

Full Project – EFFECT OF TEMPERATURE ON THE YIELD OF SHEA BUTTER IN AN UNBAFFLED VESSEL AT SELECTED KNEADING PERIOD